{"id":4120,"date":"2025-08-18T09:36:10","date_gmt":"2025-08-18T01:36:10","guid":{"rendered":"https:\/\/jieyobattery.com\/?post_type=product&p=4120"},"modified":"2025-08-18T11:19:31","modified_gmt":"2025-08-18T03:19:31","slug":"jieyo-all-in-one-battery-5kw","status":"publish","type":"product","link":"https:\/\/jieyobattery.com\/lo\/\u0eaa\u0eb4\u0e99\u0e84\u0ec9\u0eb2\/jieyo-all-in-one-battery-5kw\/","title":{"rendered":"JIEYO All In One Battery 5kw"},"content":{"rendered":"
\n
\n
\n
\n
\n
\n
\n

JIEYO All-In-One Home Energy Storage System \u2014 5\/10\/15 kW Hybrid, 51.2 V LiFePO\u2084, MPPT, 6000+ Cycles<\/h3>\n

The JIEYO All-In-One Home Energy Storage System<\/strong> integrates a high-safety LiFePO\u2084 (LFP)<\/strong> battery, hybrid inverter\/charger<\/strong>, and MPPT solar controller<\/strong> inside a single cabinet. It is engineered for residential and light-commercial sites that need dependable backup, PV self-consumption, and peak-shaving\u2014without the wiring complexity of separate boxes. With 51.2 V LFP cells<\/strong>, 6000+ cycle<\/strong> longevity, and CAN\/RS485\/RS232<\/strong> communications to mainstream energy gateways, it forms a stable, code-friendly backbone for off-grid, hybrid, or on-grid backup systems.<\/p>\n

\n

High-Performance LFP Platform (51.2 V)<\/h3>\n
    \n
  • \n

    Chemistry:<\/strong> Lithium Iron Phosphate (LiFePO\u2084 \/ LFP) for inherently stable thermal behavior and long service life.<\/p>\n<\/li>\n

  • \n

    Nominal system voltage:<\/strong> 51.2 V<\/strong> (16S LFP).<\/p>\n<\/li>\n

  • \n

    Rated energy options:<\/strong> \u2248 10.24 \/ 12.8 \/ 15.36 \/ 16.07 kWh<\/strong>* per cabinet (model-dependent).<\/p>\n<\/li>\n

  • \n

    Cycle life:<\/strong> 6000+ cycles<\/strong> at typical residential DoD profiles.<\/p>\n<\/li>\n

  • \n

    Round-trip efficiency:<\/strong> high (typ. > 95%<\/strong> with modern hybrids).<\/p>\n<\/li>\n

  • \n

    Low self-discharge:<\/strong> holds charge during seasonal or emergency standby.<\/p>\n<\/li>\n<\/ul>\n

    *Exact usable capacity depends on model, DoD setting, and environmental conditions.<\/p>\n

    Why LFP for home storage?<\/strong> Compared with NMC and lead-acid, LFP offers superior cycle life<\/strong>, flatter voltage curve<\/strong>, better thermal stability<\/strong>, and lower lifetime cost per kWh<\/strong>, translating into predictable performance across seasons.<\/p>\n

    \n

    Integrated Power Electronics & AC Output<\/h3>\n
      \n
    • \n

      Built-in pure sine wave inverter\/charger:<\/strong> 5 kW \/ 10 kW \/ 15 kW<\/strong> rated (model-dependent).<\/p>\n<\/li>\n

    • \n

      AC form factor:<\/strong> single-phase 220\u2013240 V 50\/60 Hz<\/strong> or 110\u2013120 V 60 Hz<\/strong> (regional variant).<\/p>\n<\/li>\n

    • \n

      Fast transfer<\/strong> to backup output during outages (ATS\/UPS behavior; model-dependent).<\/p>\n<\/li>\n

    • \n

      Surge capability<\/strong> sized for household compressors & motors (exact values per model).<\/p>\n<\/li>\n

    • \n

      Clean power<\/strong> for sensitive loads: IT, networking, AV, medical accessories, and appliances.<\/p>\n<\/li>\n<\/ul>\n

      \n

      PV Input & MPPT Harvest<\/h3>\n
        \n
      • \n

        Integrated MPPT controller(s):<\/strong> high-efficiency tracking for day-long solar harvest.<\/p>\n<\/li>\n

      • \n

        PV input window (typical):<\/strong> 120\u2013450 Vdc MPPT<\/strong>, \u2264 500 Vdc<\/strong> absolute max (model-dependent).<\/p>\n<\/li>\n

      • \n

        PV power budget:<\/strong> up to 6\u201310 kW<\/strong> per cabinet depending on tracker count\/rating.<\/p>\n<\/li>\n

      • \n

        Flexible strings:<\/strong> supports series strings sized to the MPPT window; combiner\/OV protection per code.<\/p>\n<\/li>\n

      • \n

        Self-consumption logic:<\/strong> prioritize PV\u2192load\u2192battery; export rules configurable where permitted.<\/p>\n<\/li>\n<\/ul>\n

        \n

        Smart BMS & System Communications<\/h3>\n
          \n
        • \n

          Pack monitoring:<\/strong> cell voltage\/current\/temperature\/SOC with active balancing.<\/p>\n<\/li>\n

        • \n

          Protections:<\/strong> over\/under-voltage, over\/under-temperature, over-current, short-circuit, charge\/discharge cutoff.<\/p>\n<\/li>\n

        • \n

          Interfaces:<\/strong> CAN \/ RS485 \/ RS232<\/strong> for closed-loop integration with hybrid inverters and gateways.<\/p>\n<\/li>\n

        • \n

          Event logs & alarms:<\/strong> streamline diagnostics and after-sales support.<\/p>\n<\/li>\n

        • \n

          Protocol mapping:<\/strong> profiles for popular inverter brands available on request.<\/p>\n<\/li>\n<\/ul>\n

          \n

          Grid Connection Modes<\/h3>\n
            \n
          • \n

            Off-grid:<\/strong> autonomous power with PV + battery where utility is unavailable.<\/p>\n<\/li>\n

          • \n

            Hybrid grid:<\/strong> self-consumption, peak-shaving<\/strong>, and time-of-use<\/strong> arbitrage; PV charges battery by day, discharge at peak.<\/p>\n<\/li>\n

          • \n

            On-grid backup:<\/strong> maintain essential circuits via backup output\/ATS during outages (per local code).<\/p>\n<\/li>\n<\/ul>\n

            \n

            Mechanical & Environmental Engineering<\/h3>\n
              \n
            • \n

              Cabinet:<\/strong> powder-coated steel\/alloy with front service access; floor-standing<\/strong> indoor\/outdoor placement.<\/p>\n<\/li>\n

            • \n

              Protection class:<\/strong> up to IP55<\/strong> (model-dependent) for dust\/splash resistance.<\/p>\n<\/li>\n

            • \n

              Thermal design:<\/strong> air-cooled<\/strong> path for quiet, long-life operation; temperature-aware charge\/discharge.<\/p>\n<\/li>\n

            • \n

              Serviceability:<\/strong> modular power & battery bays; field-replaceable submodules reduce downtime.<\/p>\n<\/li>\n

            • \n

              Footprint:<\/strong> compact \u2248 45 \u00d7 45 \u00d7 60 cm<\/strong> envelope (reference size; varies by power\/energy option).<\/p>\n<\/li>\n<\/ul>\n

              \n

              Safety by Design<\/h3>\n
                \n
              • \n

                EV-grade LFP cells<\/strong> with ceramic separators; pack-level fusing and contactors.<\/p>\n<\/li>\n

              • \n

                Pre-charge circuits<\/strong> protect inverter DC link and busbars.<\/p>\n<\/li>\n

              • \n

                Isolation & insulation<\/strong> validated to relevant standards; creepage\/clearance respected.<\/p>\n<\/li>\n

              • \n

                Compliance documents:<\/strong> CE \/ RoHS \/ UN38.3 \/ MSDS<\/strong> available for logistics and market entry.<\/p>\n<\/li>\n<\/ul>\n

                \n

                Typical Electrical Characteristics*<\/h3>\n

                (*Representative values; request a datasheet for final regional specs.)<\/p>\n

                  \n
                • \n

                  Battery:<\/strong> LiFePO\u2084, 51.2 V<\/strong> nominal; options \u2248 10.24\u201316.07 kWh<\/strong> per cabinet.<\/p>\n<\/li>\n

                • \n

                  Inverter\/charger:<\/strong> 5 \/ 10 \/ 15 kW<\/strong> rated pure sine; grid-tie\/backup modes per model.<\/p>\n<\/li>\n

                • \n

                  AC output:<\/strong> single-phase 220\u2013240 V 50\/60 Hz or 110\u2013120 V 60 Hz.<\/p>\n<\/li>\n

                • \n

                  PV MPPT:<\/strong> window typ. 120\u2013450 Vdc<\/strong>; PV power \u2264 6\u201310 kW<\/strong>.<\/p>\n<\/li>\n

                • \n

                  Round-trip efficiency:<\/strong> > 95%<\/strong> (battery + power electronics, typ.).<\/p>\n<\/li>\n

                • \n

                  Cycle life:<\/strong> \u2265 6000<\/strong> (typical residential DoD).<\/p>\n<\/li>\n

                • \n

                  Operating temps (typ.):<\/strong> charge 0\u201345 \u00b0C<\/strong>, discharge \u221210\u201355 \u00b0C<\/strong>.<\/p>\n<\/li>\n

                • \n

                  Protection class:<\/strong> IP55<\/strong> (cabinet variant).<\/p>\n<\/li>\n

                • \n

                  Comms:<\/strong> CAN \/ RS485 \/ RS232<\/strong>; vendor protocol selectable by DIP\/firmware.<\/p>\n<\/li>\n

                • \n

                  Mass (reference):<\/strong> \u2248 45 kg<\/strong> per cabinet (varies with energy\/power option).<\/p>\n<\/li>\n<\/ul>\n

                  \n

                  Applications & Use Cases<\/h3>\n
                    \n
                  • \n

                    Residential backup:<\/strong> keep routers, lighting, refrigeration, pumps, PCs<\/strong> online through outages.<\/p>\n<\/li>\n

                  • \n

                    Solar self-consumption:<\/strong> store daytime PV for evening peaks; reduce grid imports.<\/p>\n<\/li>\n

                  • \n

                    Small business:<\/strong> peak-shaving and load-shifting for shops, offices, studios.<\/p>\n<\/li>\n

                  • \n

                    Remote cabins & weak-grid sites:<\/strong> reliable hybrid\/off-grid power without fuel.<\/p>\n<\/li>\n

                  • \n

                    Essential circuits micro-UPS:<\/strong> fast transfer to protected loads for sensitive electronics.<\/p>\n<\/li>\n<\/ul>\n

                    \n

                    System Sizing Examples (Illustrative)<\/h3>\n
                      \n
                    • \n

                      5 kW \/ ~10 kWh<\/strong>: apartments & small homes; Wi-Fi, lighting, IT, refrigeration.<\/p>\n<\/li>\n

                    • \n

                      10 kW \/ ~12.8\u201315.36 kWh<\/strong>: family homes; longer autonomy for fridges, WFH setups, circulation pumps.<\/p>\n<\/li>\n

                    • \n

                      15 kW \/ ~16.07 kWh<\/strong>: larger homes\/light-commercial; supports heavier simultaneous loads.<\/p>\n<\/li>\n<\/ul>\n

                      Runtime estimate:<\/strong>
                      Runtime (h) \u2248 Capacity (Wh) \u00d7 DoD \u00d7 system efficiency \/ average load (W)<\/strong>.
                      E.g., 16.07 kWh \u00d7 0.9 \u00d7 0.92 \u2248 13.3 kWh usable<\/strong> \u2192 ~13 h at 1 kW average<\/strong>.<\/p>\n

                      \n

                      Installation & Commissioning Notes<\/h3>\n
                        \n
                      1. \n

                        Location:<\/strong> place on level floor; allow front\/side clearance for airflow and service.<\/p>\n<\/li>\n

                      2. \n

                        AC\/DC wiring:<\/strong> follow polarity and torque specs; use rated DC isolators, fuses, and breakers per code.<\/p>\n<\/li>\n

                      3. \n

                        Grounding:<\/strong> bond enclosure and neutral\/ground as required by local electrical codes.<\/p>\n<\/li>\n

                      4. \n

                        PV sizing:<\/strong> keep strings within MPPT window and absolute voltage limits; include surge\/OV protection.<\/p>\n<\/li>\n

                      5. \n

                        BMS addressing\/firmware:<\/strong> confirm inverter profile (CAN\/RS485) and DIP settings; update firmware where applicable.<\/p>\n<\/li>\n

                      6. \n

                        SOC sync:<\/strong> first-run full charge to 100% for BMS balancing and SOC calibration.<\/p>\n<\/li>\n<\/ol>\n

                        \n

                        Maintenance & Storage<\/h3>\n
                          \n
                        • \n

                          Quarterly checks:<\/strong> inspect vents, verify busbar torque, review logs for alarms.<\/p>\n<\/li>\n

                        • \n

                          Thermal care:<\/strong> keep vents clear; avoid sealed closets in hot climates.<\/p>\n<\/li>\n

                        • \n

                          Long-term storage:<\/strong> maintain 40\u201360% SOC<\/strong>, top-up every 2\u20133 months<\/strong>.<\/p>\n<\/li>\n

                        • \n

                          Firmware:<\/strong> apply approved updates for compatibility and optimizations.<\/p>\n<\/li>\n<\/ul>\n

                          \n

                          What\u2019s in the Crate (Typical)<\/h3>\n
                            \n
                          • \n

                            JIEYO All-In-One cabinet<\/strong> (battery + inverter\/charger + MPPT)<\/p>\n<\/li>\n

                          • \n

                            AC\/DC installation kit:<\/strong> lugs, gland plates, fasteners (model-dependent)<\/p>\n<\/li>\n

                          • \n

                            PV\/COM cables:<\/strong> CAN\/RS485 lead to inverter\/gateway (where applicable)<\/p>\n<\/li>\n

                          • \n

                            User manual & quick-start guide<\/strong>; basic ATS\/backup wiring diagram<\/strong>
                            (Contents vary by region and selected accessories.)<\/em><\/p>\n<\/li>\n<\/ul>\n

                            \n

                            Certifications & Quality<\/h3>\n
                              \n
                            • \n

                              Safety & transport:<\/strong> MSDS<\/strong>, UN38.3<\/strong><\/p>\n<\/li>\n

                            • \n

                              Market compliance:<\/strong> CE \/ RoHS<\/strong> (others on request)<\/p>\n<\/li>\n

                            • \n

                              Factory QA:<\/strong> incoming cell screening, module aging, full functional test with BMS logs; inverter burn-in.<\/p>\n<\/li>\n<\/ul>\n

                              \n

                              OEM \/ ODM Services<\/h3>\n
                                \n
                              • \n

                                Branding & labeling:<\/strong> logo, color accents, nameplates, packaging.<\/p>\n<\/li>\n

                              • \n

                                Electrical:<\/strong> socket standards, cable lengths, PV\/communication connectors, fuse ratings, shutdown interface.<\/p>\n<\/li>\n

                              • \n

                                Mechanical:<\/strong> custom cabinets, dust filters, outdoor kits, wall-mount or pedestal variants.<\/p>\n<\/li>\n

                              • \n

                                Protocol mapping:<\/strong> CAN\/RS485 profiles for specific inverter brands; installer integration guides.<\/p>\n<\/li>\n<\/ul>\n

                                \n

                                Key Attributes (Snapshot)<\/h3>\n
                                  \n
                                • \n

                                  Product type:<\/strong> All-in-one hybrid ESS cabinet<\/p>\n<\/li>\n

                                • \n

                                  Battery:<\/strong> 51.2 V LiFePO\u2084<\/strong>, \u2248 10\u201316 kWh<\/strong> per cabinet<\/p>\n<\/li>\n

                                • \n

                                  Power electronics:<\/strong> 5\/10\/15 kW<\/strong> pure sine inverter\/charger, MPPT<\/strong> solar controller<\/p>\n<\/li>\n

                                • \n

                                  Protection class:<\/strong> up to IP55<\/strong><\/p>\n<\/li>\n

                                • \n

                                  Communications:<\/strong> RS485 \/ CAN \/ RS232<\/strong><\/p>\n<\/li>\n

                                • \n

                                  Cycle life:<\/strong> 6000+ cycles<\/strong> (typ.)<\/p>\n<\/li>\n

                                • \n

                                  Use:<\/strong> Residential \/ Commercial \/ Industrial<\/strong> backup & PV self-consumption<\/p>\n<\/li>\n

                                • \n

                                  Origin:<\/strong> Guangdong, China<\/p>\n<\/li>\n

                                • \n

                                  OEM\/ODM:<\/strong> Available<\/p>\n<\/li>\n<\/ul>\n

                                  \n

                                  Who It\u2019s For<\/h3>\n
                                    \n
                                  • \n

                                    Homeowners<\/strong> seeking quiet, safe backup with PV integration and room to grow.<\/p>\n<\/li>\n

                                  • \n

                                    Installers<\/strong> standardizing on a single-cabinet 51.2 V<\/strong> platform that cuts wiring time.<\/p>\n<\/li>\n

                                  • \n

                                    Project buyers<\/strong> requiring documented LFP safety and CAN\/RS485<\/strong> integration.<\/p>\n<\/li>\n

                                  • \n

                                    Businesses<\/strong> aiming to reduce bills via peak-shaving and time-of-use strategies.<\/p>\n<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/article>\n","protected":false},"excerpt":{"rendered":"

                                    \n
                                    \n
                                    \n
                                    \n
                                    \n
                                    \n
                                    \n

                                    The JIEYO All-In-One Home Energy Storage System<\/strong> unifies LFP battery<\/strong>, pure-sine hybrid inverter<\/strong>, and MPPT solar<\/strong> in a compact, IP-rated<\/strong> cabinet. With 10\u201316 kWh<\/strong> energy options, 5\u201315 kW<\/strong> output classes, and 6000+ cycle<\/strong> durability, it delivers reliable backup, efficient PV self-consumption, and streamlined installation. Backed by CE\/RoHS\/UN38.3\/MSDS<\/strong> documentation and OEM\/ODM<\/strong> support, it\u2019s a practical, future-ready core for modern homes and small businesses.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

                                    <\/div>\n
                                    \n
                                    <\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/article>\n
                                    <\/div>\n","protected":false},"featured_media":2743,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[78],"product_tag":[77],"class_list":{"0":"post-4120","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-all-in-one-battery","7":"product_tag-jieyo-1200w-portable-power-station","9":"first","10":"instock","11":"shipping-taxable","12":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/product\/4120","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/comments?post=4120"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/media\/2743"}],"wp:attachment":[{"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/media?parent=4120"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/product_brand?post=4120"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/product_cat?post=4120"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/jieyobattery.com\/lo\/wp-json\/wp\/v2\/product_tag?post=4120"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}